The Standard Awning Mount secures straight 90° awnings to round tubular roof racks. CNC-machined in-house in the USA from black anodized aluminum, with extended vertical mounting slots for precise height and positioning adjustment.
Shorter mounting arm for rooftop tents, tight installations, and racks with two horizontal tubes where less vertical adjustment is needed.
Extended vertical mounting slots for straight 90° awnings requiring flexible height and positioning.
Taller, thicker mounting arm for larger, heavier 180° and 270° awnings with taller rear mounting extrusions.
Includes 2 Standard awning mounts, 2 clamps, and stainless steel hardware.
Includes 3 Standard awning mounts, 3 clamps, and stainless steel hardware.
Use calipers to measure the outside diameter of your round rack tubing, including the finished coating. Powder coating may produce a slightly oversized reading, so verify the nominal tubing size.
Don't have calipers? Download our printable sizing guide
Typically 1.75": Toyota 4Runner TRD Pro (2019–2024), FJ Cruiser (2007–2014), and Sequoia TRD Pro (2020–2022).
Typically 1.00": GOBI Toyota roof racks.
Always measure your actual rack tubing before ordering.
Space the clamps evenly along the roof rack according to the awning's mounting locations. Confirm alignment and clearance.
Use a 1/4" Allen wrench. Gradually tighten each bolt, alternating between bolts rather than fully tightening one side first. Visible thread should remain when properly installed.
Use the awning's existing attachment hardware through the vertical mounting slots. Adjust height and positioning before final tightening.
Periodically inspect and tighten mounting hardware, especially after off-road use or long trips. Follow the awning manufacturer's installation and load guidance.
Over 10+ years, GZila customers have trusted our products for quality, reliability, and real-world use.
Fits perfectly.
Another great product. I have other sets for years. I used this one to mount a 5lbs fire extinguisher on my V1 steel frame GFC. The flat section of the clamp just touches the side panels.
Used the XL brackets and clamps with perpendicular adapter for gusseted awning bracket onto yakima round cross bars on an outback. Easy install and awning ready for adventure. Gzila adjusted packaging and cost as I only needed a pair not a set of 3. Great customer service and communication. Also using a standard clamp and bracket set for 5lb propane tank holder attached to roof basket. These clamps and brackets are great solutions. Thank you.
Have bought 2 sets of these in different sizes and move my awning between vehicles.
The best option there is for mounting to a tube style rack. They seem expensive, until you hold one in your hand. I used for a ARB awning, they work perfect, zero issues
I ordered these clamps to connect to my factory Toyota 4Runner TRD Pro roof rack and they worked perfectly! The open road 270° awning I ordered came with mounting hardware but would not attach to the round tubular design of the factory roof rack. These were the perfect fit clamp style design that I needed. Great quality, heavy duty design with universal adjustability for the perfect fit and look.
Fit perfectly on roof rack TRD Pro.
The quality exceeded my expectations. Would certainly recommend to others.
This is literally the PERFECT mounting system if you have an OEM TRD Pro rack like I do. This should be a must have for any 4Runner owner. I plan on getting some more for the other side!
Exactly what I envisioned for holding awning to LoadWarrior
Not many options when it comes mounting accessories on a Rola Vortex roof rack The option for 1.5 made mounting my awning and Maxtrax super easy.
They work amazing in the TRD Pro roof rack. I have the quick release brackets mounted to the awning and they work quite nicely with the GZila mounts.
I used the 1-1/2” standard clamps to secure an ARB awning on my Intech Luna Rover trailer. They have not budged at all during the 1 year they’ve been installed. I am planning to order 2 more for a new shower room for the other side of the trailer. Great product that does its job to perfection.
These clamps fit my TRD Pro rack perfectly. The slots are spaced well and fit the Ironman 4x4 270 awning. The black anodize is nice and blends in well with the rack.
This mounts is what I needed for oem rack. I need some recovery rack mounts as will I'll soon be purchasing soon. Great product! Unless you want send me free pair lmao ! Thank you again great product
Bought the 1” for my rack and worked out perfectly. Well made very happy with the product. Will purchase again if I add my equipment to my truck.
Perfect for the 4Runner TRD Pro roof rack.
Very easy to install.
Work perfectly with Ironman 4x4 quick release brackets.
The Gzila Awning Mounts in 1” diameter works on my Land Rover Discovery safari basket rack. I used 3 Gzila mounts because the ARB Awning only supplies 3 sets of mounts bolts
This bracket is very well made. It was easy to install and fits perfectly. Customer service was excellent, I have odd ball roof rack and customer service helped me making sure it works. Very happy.
