Built for Go Fast Camper Rain-Fly Setups
This rain-fly pole holder kit turns your Go Fast Camper rain-fly into a simple awning setup using the existing utility tracks. It includes the aluminum mounting blocks, track nuts, hardware, tarp clips, and spring rod poles needed to support compatible GFC window rain-flies.
Rain-Fly Awning Setup
Helps turn your GFC rain-fly into a small awning for shade, airflow, and weather coverage.
GFC Track Compatible
Designed for Go Fast Camper utility tracks using GZila-made 1/4-20 track nuts.
Complete Kit
Includes mounting blocks, track nuts, stainless hardware, tarp clips, and spring rod poles.
Compatibility
| Designed For |
Check Before Ordering |
- Go Fast Camper utility tracks
- GFC rain-fly and window setups
- Matching Go Fast Camper roof top tents
- 5mm diameter spring rod poles
|
- Non-GFC track systems
- Rain-flies using different pole sizes
- Setups without compatible utility tracks
- Applications requiring a full-size awning
|
Selection Guide
V1 / V2 Rear Window
Rear window uses 2 blocks
V1 / V2 Side Windows
Each side window uses 2 blocks
V2 Pro Windows
Rear window uses 2 blocks; each side window uses 1 block
Whatβs Included
Aluminum Blocks
GZila-made rain-fly pole holder blocks
Track Nuts
GZila-made 1/4-20 track nuts
Stainless Hardware
Socket head bolts included
Tarp Clips
Alligator-style clips for attaching the rain-fly
Spring Rod Poles
Black-coated 5mm spring rod poles
Made in USA
Blocks and track nuts machined in-house
Before Ordering
1. Confirm your camper version
Select the option that matches your Go Fast Camper version and window setup.
2. Confirm your window location
V1 / V2 rear windows use 2 blocks. V1 / V2 side windows use 2 blocks each. V2 Pro rear windows use 2 blocks, while V2 Pro side windows use 1 block each.
3. Verify pole compatibility
This kit is designed for 5mm diameter spring rod poles only.
4. Understand the use case
This creates a lightweight rain-fly awning setup. It is not a replacement for a full-size vehicle awning.
Installation
1. Install the mounting blocks
Attach the aluminum blocks to the compatible GFC utility track using the included 1/4-20 track nuts and stainless hardware. Tighten using a standard 3/16" Allen wrench until the blocks are secure.
2. Insert the spring rod poles
Slide the 5mm spring rod poles into the pole holder blocks.
3. Clip the rain-fly
Use the included alligator-style tarp clips to attach the rain-fly to the spring rod poles.
4. Check tension and clearance
Confirm the rain-fly is secure and that the poles are properly seated before use.
Installation is simple with basic hand tools. Periodically check and tighten hardware after off-road use or long trips.
Shipping Note
Due to the size of the shipment, these typically ship by UPS, even if USPS is shown at checkout. Please avoid using a PO Box for your address. You will not be charged more than the shipping cost displayed at checkout.