Spend $75+ on Patches, Choose a FREE Mystery Vault Category

Menu
0

Spend $75+ on Patches, Choose a FREE Mystery Vault Category

0

Your Cart is Empty

ADVENTURE GEAR
    • Recovery Board Mount Mini Tubular Clamp Mount

    RECOVERY BOARD MOUNT

    Tubular Clamp Mount
    🚚 Ships Same or Next Business Day
    $99.00
    Diameter
    Pack Size

    Built for Smaller Recovery Board Slot Spacing

    These mini tubular clamps are designed to mount recovery boards to round roof rack tubing with adjustable positioning for a cleaner, more secure setup. Compatible with slot spacings of approximately 4.75" to 5.50", these mounts work with X-Bull, TRED 800, and TRED 1100 recovery boards while keeping them accessible on the trail.

    Compact Board Spacing

    Designed for recovery boards with smaller slot spacing than the XL version.

    Recovery Board Ready

    Compatible with X-Bull, TRED 800, TRED 1100, and other boards using approximately 4.75" to 5.50" slot spacing.

    Wide Diameter Range

    Available in multiple diameter options to fit a variety of round tubular roof racks.

    Compatibility

    Designed For Check Before Ordering
    • Round tubular roof rack systems
    • X-Bull, TRED 800, and TRED 1100 boards
    • Approximately 4.75" to 5.50" recovery board slot spacing
    • Compact recovery board mounting setups
    • Non-round tubing
    • Boards with incompatible slot spacing
    • Maxtrax, ActionTrax, and TRED Pro boards (see XL version)
    • Any setup where boards may contact the rack, tent, or vehicle

    What’s Included

    One Pair of Mini Mounts
    Includes two recovery board mounts
    Stainless Hardware
    Included with each set
    Made in USA
    Machined in-house from black anodized aluminum

    Before Ordering

    1. Measure your rack tubing
    Use calipers or our printable measurement tool to confirm your tube diameter before selecting a size.
    2. Confirm your board spacing
    These mounts are designed around approximately 4.75" to 5.50" slot spacing and are compatible with X-Bull, TRED 800, and TRED 1100 recovery boards. Verify fitment with your specific boards before ordering.
    3. Select the matching diameter
    Choose the clamp size that matches your actual roof rack tubing. A slightly oversized reading is normal on powder coated racks, so a 1.75" clamp may be correct even if your rack measures slightly over 1.75".

    Common reference sizes: 4Runner TRD Pro 2019–2024, FJ Cruiser 2007-2014, and Sequoia TRD Pro 2020–2022 roof racks typically use 1.75" tubing. GOBI Toyota roof racks typically use 1.00" tubing.
    4. Check clearance
    Confirm your recovery boards will clear your roof rack, rooftop tent, crossbars, vehicle body, and any nearby accessories.

    Installation

    1. Position the mounts
    Space the mounts evenly along your roof rack based on your recovery board slot spacing.
    2. Tighten the clamps evenly
    Using a 1/4" Allen wrench, gradually tighten each bolt a little at a time. Alternate between bolts instead of fully tightening one side first so the clamp seats evenly around the tubing. Visible thread should remain when properly installed.
    3. Attach your recovery boards
    Bolt your recovery boards through the mounting holes using compatible recovery board hardware. Confirm the boards are secure before driving.

    Installation is simple with basic hand tools. Periodically check and tighten hardware after off-road use or long trips.

    Customer Reviews

    Trusted by Thousands of Customers

    Over 10+ years, GZila customers have trusted our products for quality, reliability, and real-world use.

    Description

    Built for Smaller Recovery Board Slot Spacing

    These mini tubular clamps are designed to mount recovery boards to round roof rack tubing with adjustable positioning for a cleaner, more secure setup. Compatible with slot spacings of approximately 4.75" to 5.50", these mounts work with X-Bull, TRED 800, and TRED 1100 recovery boards while keeping them accessible on the trail.

    Compact Board Spacing

    Designed for recovery boards with smaller slot spacing than the XL version.

     Recovery Board Ready

    Compatible with X-Bull, TRED 800, TRED 1100, and other boards using approximately 4.75" to 5.50" slot spacing.

     Wide Diameter Range

    Available in multiple diameter options to fit a variety of round tubular roof racks.

    Compatibility

    Designed For Check Before Ordering
    • Round tubular roof rack systems
    • X-Bull, TRED 800, and TRED 1100 boards
    • Approximately 4.75" to 5.50" recovery board slot spacing
    • Compact recovery board mounting setups
    • Non-round tubing
    • Boards with incompatible slot spacing
    • Maxtrax, ActionTrax, and TRED Pro boards (see XL version)
    • Any setup where boards may contact the rack, tent, or vehicle

    What’s Included

    One Pair of Mini Mounts
    Includes two recovery board mounts     Stainless Hardware
    Included with each set     Made in USA
    Machined in-house from black anodized aluminum

    Before Ordering

    1. Measure your rack tubing
    Use calipers or our printable measurement tool to confirm your tube diameter before selecting a size.     2. Confirm your board spacing
    These mounts are designed around approximately 4.75" to 5.50" slot spacing and are compatible with X-Bull, TRED 800, and TRED 1100 recovery boards. Verify fitment with your specific boards before ordering.     3. Select the matching diameter
    Choose the clamp size that matches your actual roof rack tubing. A slightly oversized reading is normal on powder coated racks, so a 1.75" clamp may be correct even if your rack measures slightly over 1.75".

    Common reference sizes: 4Runner TRD Pro 2019–2024, FJ Cruiser 2007-2014, and Sequoia TRD Pro 2020–2022 roof racks typically use 1.75" tubing. GOBI Toyota roof racks typically use 1.00" tubing.     4. Check clearance
    Confirm your recovery boards will clear your roof rack, rooftop tent, crossbars, vehicle body, and any nearby accessories.

    Installation

    1. Position the mounts
    Space the mounts evenly along your roof rack based on your recovery board slot spacing.     2. Tighten the clamps evenly
    Using a 1/4" Allen wrench, gradually tighten each bolt a little at a time. Alternate between bolts instead of fully tightening one side first so the clamp seats evenly around the tubing. Visible thread should remain when properly installed.     3. Attach your recovery boards
    Bolt your recovery boards through the mounting holes using compatible recovery board hardware. Confirm the boards are secure before driving.

    Installation is simple with basic hand tools. Periodically check and tighten hardware after off-road use or long trips.

    Shipping

    Order Processing: Most in-stock orders ship from Florida within 1–3 business days, with many orders shipping the same or next business day when ordered before carrier pickup.

    Tracking Information: Tracking information is automatically emailed once your order has shipped. Receiving a tracking number does not necessarily mean the package was picked up by the carrier that same day.

    Need It Faster?: We can often arrange upgraded shipping options such as UPS Next Day Air or 2nd Day Air for an additional charge, depending on inventory and carrier pickup schedules.

    Shipping Terms: Once a package has been accepted and scanned by the carrier, delivery times and package handling are outside of our control. If a package is lost or damaged during transit, we will assist with filing a carrier claim when applicable. Packages marked as delivered by the carrier are considered fulfilled.

    International Orders: International customers are responsible for any customs duties, taxes, import fees, or other charges imposed by their country.

    Returns

    Due to the nature of machined aluminum products, all sales are final and we do not accept returns or provide refunds.

    Please verify sizing and compatibility before ordering. If you have questions, contact us before purchasing and we will be happy to assist.

    If you accidentally order the wrong size or configuration, please see the "Exchanges" tab above.

    Exchanges

    We may approve exchanges within 30 days of purchase if you accidentally ordered the wrong size or configuration.

    Additionally:

    • Customers are responsible for the cost of shipping the original item back to us.

    • Customers are responsible for the shipping cost of the replacement item.

    • Exchange items must be new, unused, and free from installation damage.

    • Please ensure all items are securely packaged to prevent damage during shipping. 

    • Email us (info@gziladesigns.com) before sending any exchange so we can provide instructions and confirm availability of the replacement item.

    • If the error was made by GZila Designs, we will cover the shipping costs required to correct the issue.