Spend $75+ on Patches, Choose a FREE Mystery Vault Category

Menu
0

Spend $75+ on Patches, Choose a FREE Mystery Vault Category

0

Your Cart is Empty

ADVENTURE GEAR
    • Hi Lift Jack Tubular Clamp Mount for Round Roof Racks

    HI-LIFT JACK MOUNT

    Tubular Clamp Mount
    🚚 Ships Same or Next Business Day
    $89.00
    Diameter
    Pack Size

    Built for Hi-Lift Jack Mounting

    Secure your Hi-Lift jack to round roof rack tubing with a purpose-built mounting system designed specifically for off-road recovery gear. These thicker-duty clamps feature an integrated support lip that helps carry the weight of the jack while keeping it secure and accessible on your rig.

    Integrated Support Lip

    Built-in resting surface helps support the weight of the jack during installation and use.

    Thicker Clamp Design

    Designed specifically to handle the size and weight of Hi-Lift style jacks.

    Simple Installation

    Secure your jack directly to the mounts using the included stainless steel hardware.

    Compatibility

    Designed For Check Before Ordering
    • Round tubular roof rack systems
    • Hi-Lift style jacks
    • Off-road recovery setups
    • Long-term exterior mounting
    • Non-round tubing
    • Jacks with incompatible mounting holes
    • Setups with limited side clearance
    • Any setup where the jack may contact the vehicle, tent, or accessories

    What’s Included

    One Pair of Hi-Lift Mounts
    Includes two mounting clamps
    Stainless Hardware
    Included for mounting the jack
    Made in USA
    Machined in-house from black anodized aluminum

    Before Ordering

    1. Measure your rack tubing
    Use calipers or our printable measurement tool to confirm your tube diameter before selecting a size.
    2. Confirm your jack fitment
    Verify your Hi-Lift style jack has compatible mounting holes and sufficient space for installation.
    3. Select the matching rack diameter
    Choose the clamp size that matches your actual roof rack tubing. A slightly oversized reading is normal on powder coated racks, so a 1.75" clamp may be correct even if your rack measures slightly over 1.75".

    Common reference sizes: 4Runner TRD Pro 2019–2024, FJ Cruiser 2007-2014, and Sequoia TRD Pro 2020–2022 roof racks typically use 1.75" tubing. GOBI Toyota roof racks typically use 1.00" tubing.
    4. Check clearance
    Confirm your Hi-Lift jack will clear your roof rack, rooftop tent, vehicle body, and any nearby accessories.

    Installation

    1. Position the mounts
    Space the mounts along your roof rack based on the length of your Hi-Lift jack and preferred mounting position.
    2. Tighten the clamps evenly
    Using a 1/4" Allen wrench, gradually tighten each bolt a little at a time. Alternate between bolts instead of fully tightening one side first so the clamp seats evenly around the tubing. Visible thread should remain when properly installed.
    3. Attach the Hi-Lift jack
    Place the jack on the integrated support lips and secure it using the included stainless steel hardware. Confirm all hardware is tight before travel.

    Installation is simple with basic hand tools. Periodically check and tighten hardware after off-road use or long trips.

    Customer Reviews

    Trusted by Thousands of Customers

    Over 10+ years, GZila customers have trusted our products for quality, reliability, and real-world use.

    Description

    Built for Hi-Lift Jack Mounting

    Secure your Hi-Lift jack to round roof rack tubing with a purpose-built mounting system designed specifically for off-road recovery gear. These thicker-duty clamps feature an integrated support lip that helps carry the weight of the jack while keeping it secure and accessible on your rig.

    Integrated Support Lip

    Built-in resting surface helps support the weight of the jack during installation and use.

     Thicker Clamp Design

    Designed specifically to handle the size and weight of Hi-Lift style jacks.

     Simple Installation

    Secure your jack directly to the mounts using the included stainless steel hardware.

    Compatibility

    Designed For Check Before Ordering
    • Round tubular roof rack systems
    • Hi-Lift style jacks
    • Off-road recovery setups
    • Long-term exterior mounting
    • Non-round tubing
    • Jacks with incompatible mounting holes
    • Setups with limited side clearance
    • Any setup where the jack may contact the vehicle, tent, or accessories

    What’s Included

    One Pair of Hi-Lift Mounts
    Includes two mounting clamps     Stainless Hardware
    Included for mounting the jack     Made in USA
    Machined in-house from black anodized aluminum

    Before Ordering

    1. Measure your rack tubing
    Use calipers or our printable measurement tool to confirm your tube diameter before selecting a size.     2. Confirm your jack fitment
    Verify your Hi-Lift style jack has compatible mounting holes and sufficient space for installation.     3. Select the matching rack diameter
    Choose the clamp size that matches your actual roof rack tubing. A slightly oversized reading is normal on powder coated racks, so a 1.75" clamp may be correct even if your rack measures slightly over 1.75".

    Common reference sizes: 4Runner TRD Pro 2019–2024, FJ Cruiser 2007-2014, and Sequoia TRD Pro 2020–2022 roof racks typically use 1.75" tubing. GOBI Toyota roof racks typically use 1.00" tubing.     4. Check clearance
    Confirm your Hi-Lift jack will clear your roof rack, rooftop tent, vehicle body, and any nearby accessories.

    Installation

    1. Position the mounts
    Space the mounts along your roof rack based on the length of your Hi-Lift jack and preferred mounting position.     2. Tighten the clamps evenly
    Using a 1/4" Allen wrench, gradually tighten each bolt a little at a time. Alternate between bolts instead of fully tightening one side first so the clamp seats evenly around the tubing. Visible thread should remain when properly installed.     3. Attach the Hi-Lift jack
    Place the jack on the integrated support lips and secure it using the included stainless steel hardware. Confirm all hardware is tight before travel.

    Installation is simple with basic hand tools. Periodically check and tighten hardware after off-road use or long trips.
    Shipping

    Order Processing: Most in-stock orders ship from Florida within 1–3 business days, with many orders shipping the same or next business day when ordered before carrier pickup.

    Tracking Information: Tracking information is automatically emailed once your order has shipped. Receiving a tracking number does not necessarily mean the package was picked up by the carrier that same day.

    Need It Faster?: We can often arrange upgraded shipping options such as UPS Next Day Air or 2nd Day Air for an additional charge, depending on inventory and carrier pickup schedules.

    Shipping Terms: Once a package has been accepted and scanned by the carrier, delivery times and package handling are outside of our control. If a package is lost or damaged during transit, we will assist with filing a carrier claim when applicable. Packages marked as delivered by the carrier are considered fulfilled.

    International Orders: International customers are responsible for any customs duties, taxes, import fees, or other charges imposed by their country.

    Returns

    Due to the nature of machined aluminum products, all sales are final and we do not accept returns or provide refunds.

    Please verify sizing and compatibility before ordering. If you have questions, contact us before purchasing and we will be happy to assist.

    If you accidentally order the wrong size or configuration, please see the "Exchanges" tab above.

    Exchanges

    We may approve exchanges within 30 days of purchase if you accidentally ordered the wrong size or configuration.

    Additionally:

    • Customers are responsible for the cost of shipping the original item back to us.

    • Customers are responsible for the shipping cost of the replacement item.

    • Exchange items must be new, unused, and free from installation damage.

    • Please ensure all items are securely packaged to prevent damage during shipping. 

    • Email us (info@gziladesigns.com) before sending any exchange so we can provide instructions and confirm availability of the replacement item.

    • If the error was made by GZila Designs, we will cover the shipping costs required to correct the issue.